Descripción
The DeWalt DCK690P3T 6-tool kit includes DCD796 Hammer Drill + DCF887 Impact Driver + DCH273 Hammer + DCS334 Jig Saw + DCS565 Circular Saw + DCL040 Flashlight + 3 5 Ah Batteries + DCB1104 Charger + 2 TSTAK. It is a comprehensive solution that brings together all the essential tools to tackle virtually any task in the workplace.
HAMMER DRILL DCD796
- Maximum torque: 70 Nm
- No-load speed: 0-550/2000 rpm
- Beats per minute: 0-9350/34000 bpm
- Chuck capacity: 1.5-13mm
- Max. Capacity Drilling Capacity [Wood] 40 mm
- Max capacity Drilling capacity [Metal]: 13mm
- Max capacity Drilling capacity [Masonry]: 13 mm
DCF887 IMPACT SCREWDRIVER
- Maximum torque: 205 Nm
- Output power: 400 watts
- No-load speed: 0-1000, 0-2800, 0-3250 rpm
- Impacts per minute: 0 – 3800 ipm
- Bit holder 6.35mm (1/4″)
- Weight: 0.94kg
- Length: 134mm
- Height: 195mm
- Hand/arm vibration – Impact: 22 m/s².
- Uncertainty K 1 (Vibration): 2.1 m/s²
SDS+ DCH273 PERCUSSION HAMMER
- Tool holder: SDS-Plus
- Impact energy (EPTA 05/2009) 2.1 J
- No-load speed: 0-1100 rpm
- Beats per minute: 0-4600 bpm
- Max. Drilling capacity [concrete]: 24 mm
- Max. Capacity Drilling capacity [Metal]: 13mm
- Max capacity drilling Drilling capacity [Wood]: 26 mm
- Weight: 2.5kg
- Height: 202mm
- Length: 301mm
- Width: 85mm
- Vibration control: Yes
DCS334 JIGSAW
- No-load speed: 3200 spm
- Stroke length: 26mm
- Maximum cut in wood: 135 mm
- Maximum metal cut: 25 mm
- Brushless motor
- Weight: 2.1kg
DCS565 CIRCULAR SAW
- No-load speed: 4950 rpm
- Cutting depth at 90°: 55 mm max.
- Cutting depth at 45°: 42 mm max.
- Beveling capacity: 50°
- Blade diameter: Ø 165 mm
- Hole diameter: Ø 20 mm
- Voltage: 18V
- Weight: 2.8kg
THE KIT CONTAINS
- DCD796 Hammer Drill
- DCF887 Impact Driver
- Hammer DCH273
- DCS334 jigsaw
- DCS565 Circular Saw
- DCL040 Flashlight
- 3 batteries 5 Ah
- DCB1104 Charger
- 2 TSTAK