Description
Specific water-based waterproofing to protect against dirt caused by installation, facilitating the grouting operation and subsequent final cleaning of the work, without altering the appearance of the material.
Ideal for absorbent materials such as clay, extruded sandstone, rustic natural stone, artificial stone and cement derivatives.
ADVANTAGE
- Protects against grouting dirt
- Does not alter the adhesion of the seal to the material
- Facilitates final cleaning of work
- Reduces drying times by speeding up subsequent processing where applicable
- Does not alter the appearance and lets the material breathe
- It does not create a superficial film, it is a deep product which resists the final cleaning of the work.
- Easy application
- Once applied it is possible to carry out any further treatment
- Product with very low VOC emissions: GEV certified and EC1PLUS marking contributes to Leed credits for eco-compatible buildings
IDEAL FOR
- Unpolished natural stone and terrazzo
- Mud
- Extruded Sandstone
MANUAL
Does not dilute: ready to use.
Application :
Shake before use. Thoroughly sweep the surface to be treated and apply PRW200 with a brush, uniformly avoiding puddles of product. Also apply to the edges of the placed material. The day after application, proceed with grouting, finishing with a sponge to remove any excess cement before it dries. Once the joint has set, carry out the appropriate final cleaning of the work using the appropriate detergent. Evaluate the following treatment to supplement protection. FOR PROFESSIONAL USE ONLY: on vertical surfaces, apply with a sprayer (airless system) thoroughly impregnating the material and using the appropriate DPI as indicated in the safety data sheet.
ATTENTION ! Test the product on a small area to check for possible color changes. Do not apply product if rain is expected.
PERFORMANCE
With one liter of product you can treat:
Extruded stoneware: natural
15/20 m²: Mud
manual and mechanical: 5/10 m2
Natural and artificial stone: 10/20 m2
